Author: Castronovo, D.
Paper Title Page
MOPTS043 ESS Related Activities at Elettra Sincrotrone Trieste 953
 
  • A. Fabris, D. Caiazza, D. Castronovo, M. Cautero, S. Cleva, R. De Monte, R. Fabris, M. Ferianis, A. Gubertini, T. N. Gucin, R. Laghi, G. Loda, C. Pasotti, R. Visintini, S. dr. Grulja
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
 
  Elettra Sincrotrone Trieste Research Center (Elettra) is one the Italian Institutions, together with Istituto Nazionale di Fisica Nucleare (INFN) and Consiglio Nazionale delle Ricerche (CNR), committed to the realization of the Italian in-kind contributions for the European Spallation Source. Elettra contributions are concentrated on the proton accelerator and more specifically they concern the construction of the conventional iron-dominated electro-magnets and related power converters to be installed in the superconducting part of the linac and in the High Energy Beam Transport (HEBT), the RF power stations for the superconducting spoke cavity linac section and the wire scanner acquisition system for the beam diagnostics. This paper provides a description of the contributions and an overview of the status of the construction activities.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS043  
About • paper received ※ 13 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPRB031 FERMI Configuration for the Echo Enabled Harmonic Generation Experiment 1752
 
  • E. Allaria, D. Castronovo, M. Cautero, I. Cudin, M.B. Danailov, B. Diviacco, L. Giannessi, M. Veronese, M. Zangrando
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
 
  The FERMI FEL-2 undulator line, normally operated in the double stage high gain harmonic generation with the fresh bunch (HGHG-FB) has been temporary modified to allow operating the FEL in the Echo Enabled Harmonic Generation (EEHG) scheme. An increase of the dispersion in the delay-line was required together with a replacement of the second stage modulator allowing the electron beam to resonantly interact with a second seed laser. Another critical component of the EEHG setup is a new manipulator installed in the delay-line chicane and hosting additional diagnostic components. In this work we describe in some detail these new components that allowed a successful demonstration of the EEHG at harmonics as high as 101.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB031  
About • paper received ※ 17 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPTS020 ESS Magnets at Elettra Sincrotrone Trieste 4148
THPTS019   use link to see paper's listing under its alternate paper code  
 
  • D. Castronovo, D. Caiazza, A. Fabris, R. Fabris, A. Gubertini, G. Loda
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
 
  Elettra Sincrotrone Trieste Research Center (Elettra) is one the Italian Institutions committed to the realization of the Italian in-kind contributions for the European Spallation Source. One of these consists in the supply of several conventional iron dominated electro-magnets to be installed in the superconducting part of the linac and in the transfer lines. The total number of magnets amounts to 2 dipoles, 139 quadrupoles, of four different families, and 72 correctors, of three different types. This document reports all related magnetic design and optimisations carried out to meet the required specifications and on the status of production and testing.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS020  
About • paper received ※ 14 May 2019       paper accepted ※ 21 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPTS021 Magnets for Elettra 2.0 4152
 
  • D. Castronovo, E. Karantzoulis
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
 
  After 25 years of faithfully serving the user community with excellent results, Elettra need a major upgrade with a new compact latice that will replace the existing double bend achromat for the reducing of the horizontal emittance and the increasing of the brilliance and coherence of the X-ray beam. This paper report the magnetic design development and optimisations carried out in order to satisfy the layout feasibility and the magnet strengths.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS021  
About • paper received ※ 15 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)