Author: Celona, L.
Paper Title Page
MOPTS103 First Results of Beam Commissioning on the ESS Site for the Ion Source and Low Energy Beam Transport 1118
 
  • R. Miyamoto, R.E. Bebb, E.C. Bergman, B. Bertrand, H. Danared, C.S. Derrez, E.M. Donegani, M. Eshraqi, J.F. Esteban Müller, T. Fay, V. Grishin, B. Gålnander, S. Haghtalab, H. Hassanzadegan, A. Jansson, H. Kocevar, E. Laface, Y. Levinsen, M. Mansouri, C.A. Martins, J.P.S. Martins, N. Milas, M. Muñoz, E. Nilsson, D.C. Plostinar, C. Rosati, T.J. Shea, A.G. Sosa, R. Tarkeshian, L. Tchelidze, C.A. Thomas, P. L. van Velze
    ESS, Lund, Sweden
  • I. Bergstrom
    CERN, Meyrin, Switzerland
  • L. Celona, L. Neri
    INFN/LNS, Catania, Italy
 
  The European Spallation Source (ESS), currently under construction in Lund, Sweden, will be a spallation neutron source driven by a proton linac of an unprecedented 5 MW beam power. Such a high power requires its ion source (IS) to produce proton beam pulses at 14 Hz with a high peak current more than 62.5 mA and a long plateau up to §I{3}{ms}. The IS and the following low energy beam transport (LEBT) section were manufactured and tested with beam to meet ESS requirements at INFN-LNS and delivered to ESS towards the end of 2017. Beam commissioning of these two sections on the ESS site has started in September 2018 and will continue until the end of June 2019. This paper provides an overview on this first beam commissioning period at ESS and also presents results of IS characterization and testing on LEBT functionalities.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS103  
About • paper received ※ 20 May 2019       paper accepted ※ 23 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPRB024 Low Power RF Test of a Quadrupole-free X-Band Mode Launcher for High Brightness Applications 2856
 
  • G. Torrisi, L. Celona, S. Gammino, O. Leonardi, G. Sorbello
    INFN/LNS, Catania, Italy
  • G. Castorina
    Sapienza University of Rome, Rome, Italy
  • V.A. Dolgashev
    SLAC, Menlo Park, California, USA
  • L. Faillace
    INFN-Milano, Milano, Italy
  • G.S. Mauro
    INFN/LNL, Legnaro (PD), Italy
  • G. Sorbello
    University of Catania, Catania, Italy
  • B. Spataro
    INFN/LNF, Frascati, Italy
 
  In this work we present the low power RF characterization of a novel TM01 X-band mode launcher for the new generation of high brightness RF photo-injectors. The proposed mode launcher exploits a fourfold symmetry which minimizes both the dipole and the quadrupole fields in order to mitigate the emittance growth in the early stages of the acceleration process. Two identical aluminum mode launchers have been assembled and measured in back-to-back configurations for three different central waveguide lengths. From the back-to-back results we infer the performance of each mode launcher. The low power RF test, performed at the Istituto Nazionale di Fisica Nucleare Laboratori Nazionali del Sud (INFN-LNS), validate both the numerical simulations and the quality of fabrication. An oxygen-free high-conductivity copper version of the device is being manufactured for high power and ultra high vacuum tests that are planned to be conducted at SLAC  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB024  
About • paper received ※ 09 April 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPGW033 Numerical Study of Photonic-Crystal-Based Dielectric Accelerators 3653
 
  • G. Torrisi, L. Celona, S. Gammino, D. Mascali, G. Sorbello
    INFN/LNS, Catania, Italy
  • C. De Angelis, A. Locatelli
    University of Brescia, Brescia, Italy
  • G.S. Mauro
    INFN/LNL, Legnaro (PD), Italy
  • G. Sorbello
    University of Catania, Catania, Italy
 
  All-dielectric electromagnetic band gap (EBG) waveguides structures promise significant improvement of accelerating gradient of laser-driven acceleration with the potential to miniaturize the accelerator itself. In this work we study photonic crystal structures designed for acceleration of relativistic electrons. We explore the performance of the all-dielectric EBG accelerating waveguide structures thanks to full wave electromagnetic simulations of couplers and accelerating waveguides. The characteristic interaction impedance, accelerating gradient and all the key parameters that are typically used to characterize linear accelerators are evaluated and used to compare the properties of the accelerating mode field distribution in different geometries.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW033  
About • paper received ※ 30 April 2019       paper accepted ※ 23 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)