Author: Chao, H.C.
Paper Title Page
MOPGW092 Design Status of DESY IV – Booster Upgrade for PETRA IV 331
 
  • H.C. Chao
    DESY, Hamburg, Germany
 
  In PETRA IV project the on-axis injection scheme is preferred since there is no sufficient dynamic aperture for off-axis injection in ultra low emittance storage rings. The challenge is to prepare the injected bunches with the smaller emittance and larger intensity. The current injector complex including the accumulator and booster does not fulfill the requirements and thus will need refurbishments. The injector upgrade option chosen will be composed of an upgraded electron gun, a higher energy LINAC, and the new booster synchrotron DESY IV which has smaller emittance. DESY IV will be located in the existing tunnel of the current booster DESY II. The design of the lattice and some simulation results are addressed in this article.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW092  
About • paper received ※ 18 April 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPGW011 Status of the PETRA IV project 1404
 
  • I.V. Agapov, R. Bacher, M. Bieler, R. Bospflug, R. Brinkmann, Y.-C. Chae, H.C. Chao, H.T. Duhme, M. Ebert, H.-J. Eckoldt, H. Ehrlichmann, X.N. Gavaldà, M. Hüning, U. Hurdelbrink, J. Keil, J. Klute, M. Körfer, B. Krause, G. Kube, W. Leemans, L. Lilje, F. Obier, A. Petrov, N. Plambeck, J. Prenting, G.K. Sahoo, H. Schlarb, M. Schlösser, F. Schmidt-Föhre, M. Schmitz, C.G. Schroer, T. Tempel, M. Thede, M. Tischer, R. Wanzenberg, E. F. Weckert, T. Wilksen, K. Wittenburg, J.X. Zhang
    DESY, Hamburg, Germany
 
  Since 2016 DESY has been pursuing R&D towards upgrading its PETRA synchrotron light source to a fourth-generation machine, PETRA IV, which is expected to start operation in 2027. The conceptual design of a 6 GeV seven-bend-achromat-based lattice with an approx. 10pm emittance along with critically important technical systems has been completed. We will present the status of the project, the expected parameter space of the facility, and lattice design and beam dynamics issues for the main ring.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW011  
About • paper received ※ 13 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPGW018 PETRA IV Study with Non-Interleaved Sextupole Scheme 1430
 
  • H.C. Chao, R. Brinkmann, X.N. Gavaldà
    DESY, Hamburg, Germany
 
  This study is an attempt to design PETRA IV storage ring, which is an upgrade from PETRA III toward diffraction-limit synchrotron light source, based on the non-interleaved sextupole scheme. The lattice is constructed by mixing different types of cells. There are two basic building blocks. The double minus identity (DMI) cell dedicated for the chromaticity correction with non-interleaved sextupoles is tightly built up, while the combined function FODO cell with dispersion suppressors provides straights with small beta functions ideally for undulators. In addition, the hybrid section including a 10-m long super insertion device (ID) is custom-made to adapt to DESY’s current site plan. The beam dynamic behaviors are simulated and discussed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW018  
About • paper received ※ 18 April 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)