Author: Garzella, D.
Paper Title Page
WEXXPLM1 Amplified Emission of a Soft-X Ray Free-Electron Laser Based on Echo-Enabled Harmonic Generation 2230
  • E. Allaria, L. Badano, G. De Ninno, S. Di Mitri, B. Diviacco, W.M. Fawley, N.S. Mirian, G. Penco, P. Rebernik Ribič, S. Spampinati, C. Spezzani, M. Trovò
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • G. De Ninno
    University of Nova Gorica, Nova Gorica, Slovenia
  • E. Ferrari, E. Prat
    PSI, Villigen PSI, Switzerland
  • D. Garzella
    CEA, Gif-sur-Yvette, France
  • V. Grattoni
    DESY, Hamburg, Germany
  • E. Hemsing
    SLAC, Menlo Park, California, USA
  • M.A. Pop
    MAX IV Laboratory, Lund University, Lund, Sweden
  • E. Roussel
    PhLAM/CERLA, Villeneuve d’Ascq, France
  • D. Xiang
    Shanghai Jiao Tong University, Shanghai, People’s Republic of China
  We report the first evidence of substantial gain in a soft-X ray Free Electron Laser (FEL) based on Echo-Enabled Harmonic Generation (EEHG). The experiment was focused on harmonics 36 (~7.3nm) and 45 (5.8 nm) and clearly demonstrated the expected EEHG capability of generating powerful and coherent FEL pulses, with strongly reduced sensitivity to electron-beam fluctuations. The experiment was carried out at FERMI, the seeded FEL user facility at Elettra-Sincrotrone Trieste.  
slides icon Slides WEXXPLM1 [11.410 MB]  
DOI • reference for this paper ※  
About • paper received ※ 17 May 2019       paper accepted ※ 23 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
THPGW059 Laser-Plasma Acceleration Modeling Approach in the Case of ESCULAP Project. 3723
  • V. Kubytskyi, C. Bruni, K. Cassou, V. Chaumat, N. Delerue, D. Douillet, S. Jenzer, H. Purwar, K. Wang
    LAL, Orsay, France
  • E. Baynar, M. Pittman
    CLUPS, Orsay, France
  • J. Demailly, O. Guilbaud, S. Kazamias, B. Lucas, G. Maynard, O. Neveu, D. Ros
    CNRS LPGP Univ Paris Sud, Orsay, France
  • D. Garzella
    CEA-IRFU, Gif-sur-Yvette, France
  • R. Prazeres
    CLIO/ELISE/LCP, Orsay, France
  Objective of ESCULAP project is the experimental study of Laser-Plasma Acceleration (LPA) of relativistic electron bunch from photo-injector in 10 cm length plasma cell *. In parallel, numerical tools have been developed in order to optimize the setup configuration and the analysis of the expected results. The most important issue when dealing with numerical simulation over such large interaction distances is to obtain a good accuracy at a limited computing cost in order to be able to perform parametric studies. Reduction of the computational cost can be obtained either by using state-of-the-art numerical technics and/or by introducing adapted approximation in the physical model. Concerning LPA, the relevant Maxwell-Vlasov equations can be numerically solved by Particle-In-Cell (PIC) methods without any additional approximation, but can be very computationally expensive. On the other hand, the quasi-static approximation ***, which yields a drastic reduction of the computational cost, appears to be well adapted to the LPA regime. In this paper we present a detailed comparison of the performance, in terms of CPU, of LPA calculations and of the accuracies of their results obtained either with a highly optimized PIC code (FBPIC **) or with the well known quasi-static code WAKE ***. We first show that, when considering a sufficiently low charge bunch for which the beam loading effect can be neglected, the quasi-static approximation is fully validated in the LPA regime. The case of a higher bunch charge, with significant beam loading effects, has also been investigated using an enhanced version of WAKE, named WAKE-EP. Additionally, a cost evaluation, in terms of used energy per calculation, has also been done using the multi-CPU and multi-GPU versions of FBPIC.
* E. Baynard et al, Nucl. Instrum. Meth. Phys. Res. A 909, 46 (2018)
** R.Lehe et al., Comp. Phys. Com. 203, 66 (2016)
*** P. Mora & A, Jr Th. Antonsen, Phys. of Plasmas 4, 217 (1997)
DOI • reference for this paper ※  
About • paper received ※ 14 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)