Author: Huening, M.     [Hüning, M.]
Paper Title Page
MOPTS025 Overview of the ARES Bunch Compressor at SINBAD 902
 
  • F. Lemery
    University of Hamburg, Hamburg, Germany
  • R.W. Aßmann, U. Dorda, K. Flöttmann, J. Hauser, M. Hüning, G. Kube, M. Lantschner, S. Lederer, B. Marchetti, N. Mildner, M. Pelzer, M. Rosan, J. Tiessen, K. Wittenburg
    DESY, Hamburg, Germany
 
  Funding: This project has received funding from the European Unions Horizon 2020 Research and Innovation programme under Grant Agreement No 730871.
Bunch compressors are essential for the generation of short bunches with applications in e.g. colliders, free electron lasers, and advanced accelerator concepts. The up-and-coming ARES accelerator located at SINBAD, DESY will support the formation of ~100~MeV, pC, sub-fs electron bunches for LWFA research and development. We give an overview on the ARES bunch compressor, providing start-to-end simulations of the machine and an update on its technical design.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS025  
About • paper received ※ 17 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPTS026 Status Report of the SINBAD-ARES RF Photoinjector and LINAC Commissioning 906
 
  • E. Panofski, R.W. Aßmann, F. Burkart, U. Dorda, K. Flöttmann, M. Hüning, B. Marchetti, D. Marx, F. Mayet, P.A. Walker, S. Yamin
    DESY, Hamburg, Germany
 
  The accelerator R&D facility SINBAD (Short innovative bunches and accelerators at DESY) will drive multiple independent experiments including the acceleration of ultrashort electron bunches and the test of advanced high gradient acceleration concepts. The SINBAD-ARES (Accelerator Research Experiment at SINBAD) setup hosts a normal conducting RF photoinjector generating a low charge electron beam that is afterwards accelerated to 100 MeV by an S-band linac section. The linac as well as a magnetic chicane allow the production of ultrashort pulses with an excellent arrival-time stability. The high brightness beam has then the potential to serve as a test beam for next generation compact acceleration schemes. The setup of the SINBAD-ARES facility will proceed in stages. We report on the current status of the ARES RF gun and linac commissioning.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS026  
About • paper received ※ 22 April 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPGW011 Status of the PETRA IV project 1404
 
  • I.V. Agapov, R. Bacher, M. Bieler, R. Bospflug, R. Brinkmann, Y.-C. Chae, H.C. Chao, H.T. Duhme, M. Ebert, H.-J. Eckoldt, H. Ehrlichmann, X.N. Gavaldà, M. Hüning, U. Hurdelbrink, J. Keil, J. Klute, M. Körfer, B. Krause, G. Kube, W. Leemans, L. Lilje, F. Obier, A. Petrov, N. Plambeck, J. Prenting, G.K. Sahoo, H. Schlarb, M. Schlösser, F. Schmidt-Föhre, M. Schmitz, C.G. Schroer, T. Tempel, M. Thede, M. Tischer, R. Wanzenberg, E. F. Weckert, T. Wilksen, K. Wittenburg, J.X. Zhang
    DESY, Hamburg, Germany
 
  Since 2016 DESY has been pursuing R&D towards upgrading its PETRA synchrotron light source to a fourth-generation machine, PETRA IV, which is expected to start operation in 2027. The conceptual design of a 6 GeV seven-bend-achromat-based lattice with an approx. 10pm emittance along with critically important technical systems has been completed. We will present the status of the project, the expected parameter space of the facility, and lattice design and beam dynamics issues for the main ring.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW011  
About • paper received ※ 13 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPGW029 The Injection System and the Injector Complex for PETRA IV 1465
 
  • J.X. Zhang, I.V. Agapov, H. Ehrlichmann, X.N. Gavaldà, M. Hüning, J. Keil, F. Obier, M. Schmitz, R. Wanzenberg
    DESY, Hamburg, Germany
 
  PETRA IV project is to upgrade PETRA III to a synchrotron radiation source with an ultra-low emittance. Due to the small dynamic aperture of the PETRA IV storage ring, a horizontal on-axis injection is prepared. In this paper, the preliminary study of the injection scheme is described. To meet the requirements of the on-axis injection, a plan of a new injector complex, including the Gun, the LINAC and the accumulator is shown in this paper. Several options are discussed in this paper, too.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW029  
About • paper received ※ 14 May 2019       paper accepted ※ 23 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPRB008 LUXE - a QED Experiment at the European XFEL 1694
 
  • F. Burkart, R.W. Aßmann, R. Brinkmann, W. Decking, N. Golubeva, B. Heinemann, M. Hüning, J. List, M. Wing
    DESY, Hamburg, Germany
  • M. Wing
    UCL, London, United Kingdom
 
  The proposed experiment aims to measure QED in the presence of strong fields and above the Schwinger critical field. An experiment is being considered at the European XFEL, which should be able to measure non-perturbative QED and its transition from the perturbative regime. This paper presents the current status of the LUXE (Laser und XFEL Experiment) design study. First layout considerations; accelerator beam line design, electron and laser beam parameters, radioprotection issues and first results of the start to end simulations will be presented and discussed in detail. An outlook concerning the implementation into the XFEL schedule and timeline of this experiment will be given.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB008  
About • paper received ※ 14 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)