Keyword: wiggler
Paper Title Other Keywords Page
MOPGW021 Symplectic Tracking for the Robinson Wiggler storage-ring, dynamic-aperture, electron, linear-dynamics 120
 
  • J. Li, J. Feikes, T. Mertens, Y. Petenev, M. Ries, A. Schälicke
    HZB, Berlin, Germany
 
  A Robinson wiggler (RW) is considered to be installed in the Metrology Light Source (MLS) to lengthen the bunch and improve the Touschek lifetime by manipulating the damping partitions. Symplectic tracking is crucial to study the impact of the nonlinear field components introduced by the Robinson wiggler. This paper introduces a tracking method based on an implicit symplectic integrator to solve the exact Hamiltonian equations of particle motion in the wiggler. In addition, a numerical generating function method is implemented as an approach to realize fast tracking.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW021  
About • paper received ※ 14 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPGW100 Bypass Design for Testing Optical Stochastic Cooling at the Cornell Electron Storage Ring (CESR) optics, sextupole, radiation, damping 360
 
  • W.F. Bergan, M.B. Andorf, M.P. Ehrlichman, V. Khachatryan, D. L. Rubin, S. Wang
    Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
 
  Funding: NSF-1734189 DGE-1650441
Optical Stochastic Cooling (OSC) is a promising method for cooling very dense stored particle beams through the interference of radiation created in an upstream ’pickup’ wiggler and a downstream ’kicker’ wiggler. By correlating a particle’s path length via a bypass between the two wigglers with its betatron coordinates in the pickup, the particle will receive a kick in energy which, through coupling introduced by non-zero horizontal dispersion in the kicker, can reduce its betatron amplitude, thus cooling the beam. A proof-of-principle test of this technique is being planned at the Cornell Electron Storage Ring (CESR). In addition to maintaining standard requirements such as a large dynamic aperture and acceptable lattice functions throughout the ring, the design of the bypass is guided by the mutually competing goals of maximizing the cooling rate while maintaining a sufficiently large cooling acceptance with properly-corrected nonlinearities. We present a design of such a bypass and ring optics so as to best achieve these objectives.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW100  
About • paper received ※ 14 May 2019       paper accepted ※ 19 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMP012 Concepts of Longitudinally Polarized Electron and Positron Colliding Beams in the Circular Electron Positron Collider polarization, positron, resonance, electron 445
 
  • Z. Duan, J. Gao, X.P. Li, D. Wang, Y. Wang, W.H. Xia, Q.J. Xu, C.H. Yu, Y. Zhang
    IHEP, Beijing, People’s Republic of China
 
  Funding: Work supported by National Key Research and Development Program of China (No.2018YFA0404300).
This paper reports some preliminary study into the imple- mentation of longitudinally polarized e+/e colliding beams in the Circular Electron Positron Collider, at a center of mass energy of 91 GeV as a Z factory and energies beyond.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP012  
About • paper received ※ 15 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPTS097 Updates on Alternative Pre-Booster Ring Design and Wiggler Magnet Considerations of SPS for the FCC e+e Injector damping, emittance, injection, extraction 1094
 
  • O. Etisken
    Ankara University, Faculty of Sciences, Ankara, Turkey
  • F. Antoniou, Y. Papaphilippou, T. Tydecks
    CERN, Meyrin, Switzerland
  • A.K. Çiftçi
    Izmir University of Economics, Balçova/Izmir, Turkey
 
  The Future Circular e+e Collider (FCC- e+e) injector complex needs to produce and to transport a high-intensity e+e beam at a fast repetition rate for topping up the collider at its collision energy. Two different options are under consideration as pre-accelerator before the bunches are transferred to the high-energy booster: using the existing SPS and designing a completely new ring. The purpose of this paper is to explore the needs and parameters of the existing SPS, to investigate wiggler magnet options for SPS, and provide an updated study of alternative accelerator ring design with injection and extraction energies of 6 and 20 GeV, respectively. In this study, the parameters of both choices are established, including the optics design, layout update and considerations for non-linear dynamics optimization.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS097  
About • paper received ※ 06 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPGW042 Study of the Intra-beam Scattering Effects in the HALS Storage Ring emittance, damping, storage-ring, lattice 1501
 
  • W. Li, Z.H. Bai, W. Li, D.R. Xu, T. Zhang
    USTC/NSRL, Hefei, Anhui, People’s Republic of China
 
  Funding: This work was supported by the Fundamental Research Funds for the Central Universities (Grant No.WK2310000082 and WK2310000077).
The Hefei Advanced Light Source (HALS) is designed to be a dedicated 4th generation diffraction limited light source. In 2018, the baseline lattice of the HALS storage ring has been proposed, with an ultra-low natural emittance of about 25 pm-rad. The preliminary study of intra-beam scattering effects on the beam emittance growth in the HALS storage ring has been performed with this baseline lattice. Due to the limited synchrotron radiation in this storage ring, damping wigglers are expected in this storage ring to reduce the damping time and reduce the emittance. In this paper, we will present the simulation results of the IBS effects, estimated effectiveness of damping wiggler and the corresponding linear optics calibration of the perturbation due to insertion device, and finally the estimated Touschek lifetime will be shown.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW042  
About • paper received ※ 13 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPGW068 New Source for Bending Magnet Beam Lines at Ultra-Low-Emittance Ring dipole, radiation, lattice, storage-ring 1557
 
  • M. Abbaslou, M. Sedaghatizadeh
    KNTU, Tehran, Iran
  • S. Dastan, J. Rahighi, F. Saeidi
    ILSF, Tehran, Iran
 
  The Iranian Light Source Facility (ILSF) is a 3 GeV 3rd synchrotron radiation laboratory in the basic design phase. The Storage Ring (SR) is based on a five-bend achromat (5BA) lattice providing low horizontal emittance of 0.27 nm.rad. Due to the ILSF storage ring, straight section limits the use of the short length wigglers for hard X-ray generation is recommended. Which are removable in the lattice. In this article, the new design of the 3-pole wiggler is investigated and the main parameters of this 3-pole wiggler, by considering the ILSF storage ring characteristics, is modified. Also, the effect of the new 3-pole wiggler on the beam dynamics is investigated and the advantages of the new design are presented.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW068  
About • paper received ※ 28 April 2019       paper accepted ※ 23 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPGW069 Insertion Devices for the Day-One Beamlines of ILSF undulator, vacuum, storage-ring, polarization 1561
 
  • M. Hadad
    Shahid Beheshti University, Tehran, Iran
  • S. Dastan, M. Hadad, J. Rahighi, M. Razazian, F. Saeidi, S. Yousefnejad
    ILSF, Tehran, Iran
 
  The Iranian Light Source Facility (ILSF) is a new 3 GeV synchrotron radiation laboratory with ultralow emittance of 270 pm-rad, which is in the design stage. Seven beamlines are planned to start operation with several different insertion devices installed in the storage ring either from "day one" or within the first year of operation. The most operational undulator for polarized radiations -Apple II- has been deliberated for the solid state electron spectroscopy, the Spectromicroscopy and the ARPES beamlines. The hybrid wigglers for the XPD and the EXAFS beamlines and in-vacuum undulators for Macromolecular Crystallography and SCD beamlines have been chosen too. The emission of these IDs covers a wide spectral range extending from hard X-rays to UV. Pre-design of the IDs were already done in ILSF. The main parameters of magnetic design as well as radiation parameters for the first phase of ILSF insertion devices have been described in this paper.
farhad.saeidi@ipm.ir
saeidi.farhad@gmail.com
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW069  
About • paper received ※ 15 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPGW077 Impact of the DIAD Wiggler and ’Missing-sextupole’ Optics on the Diamond Storage Ring sextupole, storage-ring, optics, operation 1581
 
  • I.P.S. Martin, R. Bartolini, B. Singh
    DLS, Oxfordshire, United Kingdom
 
  In order to generate space for a short, out-of-vacuum multipole wiggler for the DIAD beamline, a single sextupole was removed from one of the DBA arcs in the Diamond Storage Ring during June 2018. The removal of this sextupole presented a number of challenges to the operation of the storage ring, requiring a re-optimisation of the remaining sextupole strengths*, a change in tune-point and modification of the orbit and coupling correction schemes. In this paper we describe the implementation of these changes, and provide an assessment of the impact that the installed wiggler has made on the storage ring parameters.
* B. Singh et al. ’Studies to Install a Multipole Wiggler by Removing a Chromatic Sextupole in Diamond Storage Ring’, Proc. IPAC 2016, Busan, Korea, paper THPMR050, (2016)
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW077  
About • paper received ※ 15 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPGW089 Tunable Bunch Train Generation Using Emittance Exchange Beamline With Transverse Wiggler controls, simulation, emittance, bunching 1612
 
  • G. Ha, M.E. Conde, J.G. Power, J.H. Shao, E.E. Wisniewski
    ANL, Argonne, Illinois, USA
 
  Funding: This work is supported by LDRD program at Argonne National Laboratory and Department of Energy, Office of High Energy Physics, under Contract No. DE-AC02-06CH11357.
Emittance exchange beamline provides a unique correlation between the upstream transverse momentum and downstream longitudinal timing. Similar to the bunch train generation concept using energy modulation and chicane, the emittance exchange beamline can convert the transverse momentum modulation to the temporal modulation at the end of the beamline. The beam can obtain this transverse modulation from alternating magnet array (e.g. 90 degree rotated undulator). While most of other methods provide only one knob to control both micro-bunch length and bunch-to-bunch spacing or hard to control one of the knobs, this method provides separated knobs for the micro-bunch length and spacing and they are easy to control. These knobs enable to separately control the fundamental frequency of the radiation and its bandwidth. We plan to demonstrate this method at Argonne Wakefield Accelerator facility (AWA). This poster present progress on this new method and its demonstration at AWA.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW089  
About • paper received ※ 21 May 2019       paper accepted ※ 23 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPGW093 Compensation of Insertion Device Induced Emittance Variations in Ultralow Emittance Storage Rings by a Dispersion Bump in a Wiggler emittance, storage-ring, lattice, dipole 1627
 
  • F. Sannibale, M.P. Ehrlichman, T. Hellert, S.C. Leemann, D. Robin, C. Steier, C. Sun, M. Venturini
    LBNL, Berkeley, California, USA
 
  Funding: Work supported by the Director of the Office of Science of the US Department of Energy under Contract no. DEAC02-05CH11231.
Multi-bend achromat lattices allow for the design of extremely low emittance electron storage rings and hence for the realization of extremely high- brightness X-ray photon sources. In these new rings, the beam energy lost to radiation in the insertion devices (IDs) is often comparable to that lost in the ring dipole magnets. This implies that with respect to the typical 3rd generation light source, these new machines are more sensitive to the energy loss variations randomly occurring as the many users independently operate the gap of their IDs. The consequent induced variations in radiation damping time, equilibrium emittance, and transverse beam sizes at the radiation point sources can be significant and degrade the experimental performance in some of the beam-lines. In this paper we describe and discuss a possible method to compensate for such emittance variations by using a variable dispersion bump localized inside a fixed gap wiggler.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW093  
About • paper received ※ 13 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPMP041 Damping Bunch Oscillations Due to Off-Axis Injection optics, injection, damping, radiation 2422
 
  • F. Zimmermann, O. Etisken, N. Mounet, A. Oeftiger, S. Ogur, Y. Papaphilippou, B. Salvant
    CERN, Geneva, Switzerland
  • K. Oide
    KEK, Ibaraki, Japan
 
  Funding: This work was supported by the European Commission under the HORIZON 2020 project ARIES, grant agreement no. 730871.
In the FCC-ee pre-injector complex, a slightly modified SPS can serve as pre-booster. The baseline design foresees injecting the low-emittance electron and positron bunches off-axis into the SPS, and deploying strong wigglers to greatly enhance the radiation damping at the injection energy. We here compare the damping of large injection oscillations by means of radiation damping with the effect of other possible damping mechanisms such as a fast bunch-by-bunch feedback system and/or head-tail damping via nonzero chromaticity. As a by-product, we investigate the transverse beam stability.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP041  
About • paper received ※ 10 May 2019       paper accepted ※ 23 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPTS102 Helical Wiggler Model for Fast Tracking radiation, electron, optics, undulator 3356
 
  • W.F. Bergan, V. Khachatryan, D. L. Rubin
    Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
 
  Funding: NSF-1734189 DGE-1650441
In order to test the process of Optical Stochastic Cooling (OSC) at the Cornell Electron Storage Ring (CESR), we plan to use helical wigglers as both the pickup and kicker, since the required radiation wavelength of 800nm can be achieved with lower magnetic field strength in helical as compared to planar wigglers. In order to simulate the lattice with such wigglers, it is useful to be able to model the effect of the wiggler on the optics without resorting to direct tracking, which is time-consuming and so ill-suited for the repeated evaluations necessary in running an optimizer. We generate a Taylor map to third order for this element using analytic field expressions, enabling easy determination of the effects of such an element on linear and nonlinear optics. This model is compared with the results of direct tracking and shows good agreement.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS102  
About • paper received ※ 14 May 2019       paper accepted ※ 23 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPTS030 HEPS-TF Superconducting Wiggler Control System controls, EPICS, power-supply, interface 4174
 
  • J.C. Wang, C.P. Chu, Y. Gao, Q. Le, J. Liu, R. Ye, M.C. Zhan
    IHEP, Beijing, People’s Republic of China
 
  Funding: HEPS-TF
Superconducting Wiggler (SCW) is an important development direction of insertion devices for modern light sources. It is also the key technology of High Energy Photon Source Test Facility (HEPS-TF) insertion device system research. SCW control system involves power supply, cryogenics,vacuum and other devices, control. Serial port server was built for the SCW control system, with EPICS DB to make the PID algorithm for heater and superconductor cavity pressure, temperature, and with Ziegler-Nichols method to quickly find appropriate PID parameters.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS030  
About • paper received ※ 15 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPTS072 Field Measurements for a Superconducting Magnet at Room Temperature multipole, vacuum, superconducting-magnet, simulation 4281
 
  • J.C. Jan, C.-C. Chang, Y.L. Chu, J.C. Huang, C.-S. Hwang, C.Y. Kuo, F.-Y. Lin
    NSRRC, Hsinchu, Taiwan
 
  A superconducting multipole wiggler (SMPW) was fabricated at the National Synchrotron Radiation Research Center (NSRRC) and was installed in the Synchrotron Light Research Institute (SLRI). A 3.5 T field strength could be generated by the NbTi coils and the magnetic arrays are immersed in a liquid helium (LHe) bath. A removable mapping chamber, made from thin stainless steel sheets, was developed to allow field mapping in the narrow aperture of the SMPW. The mapping chamber provides a room temperature environment for the magnetic field mapping and enables an easier field scan in the cryostat. The design for the mapping chamber includes a blockage of heat transfer from room temperature to the LHe bath and is strong enough to resist deformations during evacuation. The mechanical design, strain simulation, thermal simulation, dummy test and measurement results with the mapping chamber will be discussed in this paper.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS072  
About • paper received ※ 10 April 2019       paper accepted ※ 23 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)