Author: Gao, Z.
Paper Title Page
MOPTS057 SSPA upgrade plan design for CiADS 990
  • Q. Chen, Z. Gao, Y. He, G. Huang, R. Huang, T.C. Jiang, S.H. Liu, L.P. Sun, X.W. Wang, Z.J. Wang, W.M. Yue
    IMP/CAS, Lanzhou, People’s Republic of China
  Funding: Supported by the National natural science foundation of China (Grand No. 11525523 and 91426303)
For ADS application, both research and commercial facilities requires extremely large amount of RF power to drive several mega watts beam power, so proper RF power upgrade plan can reduce the budget per phase and increase the valuable experience in engineering. CiADS (China initiative Accelerator Drive System) proposes to employ SSPA (Solid State Power Amplifier) as RF power source for flexible configuring and upgrading in the future. In this paper, from an engineering point of view, it is acceptable if proper matching beam current was selected for adopting fixed-coupling input coupler while only sacrificed some RF power during the upgrade plan. SSPA upgrade plan start with the stablility requirement to determine bandwidth, then combined with other RF power requirements to select output level, finally, checking how much the surplus of selected level SSPA for detuning control. The calculation and evaluation results for a §I{545}{MeV} physical design lattice illustrate that some resonance cavities had very limited surplus RF power left for detuning control that provided necessary optimization direction and guidelines for both physical design and SSPA arrangement.
DOI • reference for this paper ※  
About • paper received ※ 30 April 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)